OMNI-200 Tester In Pusher

The OMNI-200-TIP is an industry proven integrated acquisition system for BOP and Steam Generator applications. The system consists of the TD-200 probe pusher technology coupled with the state of the art OMNI-200 digital acquisition technology. The modular design of the system permits the user to add or upgrade individual portions of the system as the technology changes. The days of owning outdated equipment when these changes occur are gone! In addition, this feature provides the flexibility to use the acquisition unit independent of the probe pusher by simply disabling the pusher function, or for a more portable solution the acquisition unit can be removed and placed in the OMNI-DOCK, portable docking station.

System Specifications

Power	100 VAC 50/60 Hz
Environmental	32 to 113°F (0 to 45C) operating range -4 to 158°F (-20 to 70°C) storage
Interface	Single 10/100 Ethernet connection
Mechanical	Main Drive: 13”L x 14”W x 8”H (33.0 x 35.6 x 20.3 cm) 46.0 lbs. (20.9 kg) Take-up Drive: 12”L x 14”W x 13”H (30.5 x 35.6 x 33.0 cm) 27 lbs. (12.3 kg) OMNI-200 Spool: 12.5” Diameter x 4” W (31.8 x 10.2 cm) 6.0 lbs. (2.7 kg) Drive Control Pod: 22”L x 7.5”W x 4”H (55.9 x 19.1 x 10.2 cm) 13.0 lbs. (5.9 kg)

TrackDrive-200 Acquisition System

Supported Probes	AIM (Analog Interface Module) Standard Bobbin Probes SG Array Technologies Brush and Brushless RPC Probes RFT Bobbin Probes 8x1 Probes
Frequency Range	20 Hz to 2.5 MHz
Drive Voltage	0 to 60 Vpp 300mA protected
DC Output	0 to 10 Volt 1.5A protected
RPC Motor Output	0 to 10 Volt 1.5 A protected
System Gain	-22 to 20db adjustable
Preamp Gain	0 to 700 adjustable
Probe Inputs	6 differential, 2 selectable differential/absolute
Frequency Generators	4 multiplexed or simultaneous
Impedance Matching	Eliminates need for Hardware Null
Auto Reference	Eliminates need for separate absolute probe
Sample Rate	Samples/Second mode : 100 to 10000 s/s Samples/Distance mode : English or Metric selectable
Status and Diagnostic	Voltage and Temperature monitoring (software) Application specific LEDs (AIM)
Analog Power Disable	Automatic during probe change
Channel Capacity	Simultaneous mode 32 Multiplexed mode 128 Context mode 512

Standard System Contents:

1. AIM for Bobbin and RPC Probes
2. Spare Track
3. Roller Plate for 3/8 Diameter probe shafts
4. Power Cord
5. Operating Guide
6. Certificate of Calibration
7. Shipping Case

TrackDrive-200 TIP

PART#	DESCRIPTION
OMNI-200-TIP-L	OMNI-200 Tester In Pusher (Left Handed Unit) (Case Sold Separately) Includes One Module Plus OMNI Dock.
OMNI-200-TIP-R	OMNI-200 Tester In Pusher (Right Handed Unit) (Case Sold Separately) Includes One Module Plus OMNI Dock.
OMNI-200-TIP-FRENCH	OMNI-200 Tester in Pusher (French Modifications)
OMNI-200-TIP-AR	Array Support
OMNI-200-TIP-M-B	Bobbin Module
OMNI-200-TIP-M-X	X-Probe and RFT Module
OMNI-200-TIP-M-IP	I-Probe Module for use with the MHI Intelligent probe.
OMNI-200-TIP-M-CSA	Array Probe Module
OMNI-200-TIP-M-S	Smart Array Module
OMNI-200-TIP-M-CAL	Calibration Module (CAL-SOFT Software Package Included)
OMNI-200-TIP-M-SX	SAX 1/SAX 2 Bobbin Module Saturation Drive
OMNI-200-TIP-M-SS	STS/S10 RPC Module with 0-10V Polarity Reversing Drive
OMNI-200-TIP-M-ST	STT RPC Module
OMNI-200-TIP-M-8X	BOP Module
OMNI-200-TIP-M-RFT	BOP ET/RFT/RPC Module
OMNI-200-TIP-DU	Drive Unit
OMNI-200-TIP-TT	Take Up with Tester
OMNI-200-TIP-DC	Drive Control Unit
OMNI-200-TIP-CS	Track Drive Case
OMNI-200-TIP-TS	Take Up Spool for TIP (no tester)
OMNI-200-TIP-30-SP	30" Take Up Spool TIP (no tester)
OMNI-200-TIP-30-SP-CS	Case for 30" Take Up Spool
OMNI-200-TIP-30-SP-MOD	Modification from Original TIP to 30" Take Up Assembly